BUTTON BAR

____________________________________________________________________________________________________________________

| HOME | TECH | BRAKE HOSE CUSTOMIZATION |

____________________________________________________________________________________________________________________




Tuesday, April 18, 2017

Ford Ranger (T6) 3.2D Wildtrak Steel Braided Brake Lines

To further improve the braking performance of the Ford Ranger 3.2D Wildtrak e.g.  upgrading the disc rotors and calipers, one often omit the importance of the brake hoses.

Here at the SUPERCIRCUIT Steel Braided Brake Lines department, we have the solution for whose who understand the importance of the brake system.


The factory stock front brake hoses of the Ford Ranger are made of rubber (see pictures below). Most of the time, moisture will be absorbed into the brake fluid systems through rubber brake hoses and contaminate brake fluid, contaminated brake fluid can be harmful to the rubber brake hoses' inner surface, and affect the braking performance. It is advisable to check your rubber brake hoses frequently for possible faulty.



In the picture below, the Ford Ranger factory stock front rubber brake hoses are being changed to steel braided ones from SUPERCIRCUIT. The steel braided brake hose gives more feedback and more responsive against the factory fitted rubber brake hose due to the superior performance of the inner Teflon core and steel braided outer layer preventing the brake hose from expanding under severe conditions i.e. high temperature operation, heavy braking, down hills etc.


Both the factory stock rubber brake hoses of the Ford Ranger (T6) 3.2D Wildtrak is located at the middle of the rear axle as shown in the picture below. 


The rubber brake hoses are being replaced with the SUPERCIRCUIT Steel Braided Brake hoses. The steel braided brake hoses improve braking response, eliminate brake pedal sponginess, provide firm and immediate brake response hence reduce braking distance during emergency braking is especially important for such a heavy and big size truck.


SUPERCIRCUIT steel Braided Brake Lines are compliant to Society of Automotive Engineers, International (SAE J1401) and DOT Standard Federal Motor Vehicle Safety Standard (FMVSS106) and every hose is tested to 3000 p.s.i. (normal brake master pump will reach around 1800 p.s.i.). Best of all, it comes with lifetime warranty*. 


For more information, please contact SuperCircuit Exhaust Pro Shop, Sunway Technology Park. Tel: +6 03 5632 2855 or like us on Facebook to get more updated information about the products.

* T&C Applies.

No comments:

Post a Comment