BUTTON BAR

____________________________________________________________________________________________________________________

| HOME | TECH | BRAKE HOSE CUSTOMIZATION |

____________________________________________________________________________________________________________________




Monday, December 18, 2017

BMW F30 3-series Steel Braided Brake Lines

We have supplied and installed the SUPERCIRCUIT Steel Braided Brake Lines to the BMW F30 3-series below for better braking response and to improve the stopping performance.


The wheels are removed to access to the original rubber brake hoses at the front.


The BMW F30 factory supplied rubber brake hoses have the tendency to expand under high braking pressure and while the brake fluid is cooking, hence delayed the braking response.


To counter the shortfall of the rubber brake hoses, the SUPERCIRCUIT Steel Braided Brake Hoses are Teflon cored with braided stainless steel around them, so they will not expand or swelling under such condition, hence the braking performance is maintained even under very high operation temperature and extremely high braking pressure!


The rear brake hoses are equally important and not to be missed out.


The rear of the BMW F30 3-series originally comes with two rubber brake hoses and they are to be replaced with the high performance SUPERCIRCUIT Steel Braided Brake Hoses too!



SUPERCIRCUIT steel Braided Brake Lines are compliant to Society of Automotive Engineers, International (SAE J1401) and DOT Standard Federal Motor Vehicle Safety Standard (FMVSS106) and every hose is tested to 3000 p.s.i. (normal brake master pump will reach around 1800 p.s.i.).

To order or for more information about the above SUPERCIRCUIT Steel Braided Brake Line Kit specially developed for the BMW F30 3-series, please contact SuperCircuit Exhaust Pro Shop, SS13 Subang Jaya Industrial Estate. Tel: 03 5632 2855 or follow us on the Facebook Page for more updates and information about the brake lines.

Sunday, November 19, 2017

Honda Civic FN2 Type-R Steel Braided Brake Lines

The SUPERCIRCUIT Steel Braided Brake Lines made for the European Version Honda Civic FN2 Type-R for better braking response and stopping power.


To access to the front brake hoses, remove the front wheels of the Honda Civic FN2 Type-R as shown in the picture below.


The below picture shows the factory stock rubber brake hose of the front right hand side of the Honda Civic FN2 Type-R. Rubber brake hoses have the tendency to expand under high braking pressure and while the brake fluid is cooking (over heated), hence delayed the braking response.



To counter the shortfall of the rubber brake hoses, the SUPERCIRCUIT Teflon core with braided stainless steel around it does not expand or swelling under such condition, so the braking performance is maintained even under very high operation temperature and extremely high braking pressure!

The below picture shows the front right hand side of the Honda Civic FN2 Type-R brake hose being replaced by the SUPERCIRCUIT Stainless Steel braided one.


Please take note that there are in total f4 pieces of rubber brake hoses at the rear of the Honda Civic FN2 Type-R. 2 pieces are located at slightly above the rear axle and the other two are at each rear calipers.

In order to get the optimum braking benefits from the steel braided brake lines, all 6 pieces of the factory stock rubber brake hoses are to be replaced by the SUPERCIRCUIT steel braided brake lines. 

This is the rear left inner rubber brake hose and the second picture below shows after it is replaced by the SUPERCIRCUIT steel braided one.



In the pictures below, the Honda Civic FN2 Type-R rubber brake hose at the inner right side of the rear axle and that being replaced by the steel braided one. 



The other two rear rubber brake hoses are at the rear calipers, one each for the rear calipers of the Honda Civic FN2 Type-R.



The length of the brake hoses and the angle of the fittings are carefully calculated and simulation of the movements on both front and rear suspension and steering is taken into account during the development of this brake hose kit to ensure maximum safety.

The USA engineered SuperCircuit steel Braided Brake Lines are compliant to Society of Automotive Engineers, International (SAE J1401) and DOT Standard Federal Motor Vehicle Safety Standard (FMVSS106) and every hose is tested to 3000 p.s.i. (normal brake master pump will reach around 1800 p.s.i.). Best of all, it comes with Lifetime Warranty*. 

To order or for more information about the above SUPERCIRCUIT Steel Braided Brake Line Kit specially developed for the Honda Civic FN2 Type-R, please contact SuperCircuit Exhaust Pro Shop, SS13 Subang Jaya Industrial Estate. Tel: 03 5632 2855 or join our Facebook Page for more updates and information on the brake lines.


* T&C applies.

Wednesday, October 18, 2017

Volkswagen Touareg 3.2 Steel Braided Brake Lines

The SUPERCIRCUIT Steel Braided Brake Line Kit made for the 1st generation Volkswagen Touareg 3.2L VR6 (7L) improves the braking response and stopping performance of this heavy SUV.


<AT THE FRONT>
The Volkswagen Touareg 3.2 V6 factory supplied rubber brake hoses have the tendency to expand under high braking pressure and while the brake fluid is cooking, hence delayed the braking response.

To counter the shortfall of the rubber brake hoses, the SUPERCIRCUIT Teflon core with braided stainless steel around it does not expand or swelling under such condition, so the braking performance is maintained even under very high operation temperature and extremely high braking pressure! 



It is replaced with the SUPERCIRCUIT Steel Braided Brake Hose for better braking response and stopping performance.


<AT THE REAR>
Equally important and not to be missed out, the rear of the Volkswagen Touareg 3.2L V6 originally comes with two rubber brake hoses are to be replaced with the high performance SUPERCIRCUIT Steel Braided Brake Hoses too!


Contaminated brake fluid can be harmful to the rubber brake hoses' inner surface, and affect the braking performance. So, please check your rubber brake hoses frequently or to change it to the very long lasting SUPERCIRCUIT Steel Braided Brake Line Kit.

SUPERCIRCUIT steel Braided Brake Lines are compliant to Society of Automotive Engineers, International (SAE J1401) and DOT Standard Federal Motor Vehicle Safety Standard (FMVSS106) and every hose is tested to 3000 p.s.i. (normal brake master pump will reach around 1800 p.s.i.). Best of all, it comes with Lifetime Warranty*!



To purchase or for more information about the above steel braided brake lines kit made for the 1st generation VW Touareg 3.2L VR6 (2002-2010, 7L), please contact SuperCircuit Exhaust Pro Shop, SS13 Subang Jaya Industrial Estate. Tel: 03 5632 2855 or like our Facebook Page for more updates and information on the brake lines.

* T&C Applies.

Friday, September 29, 2017

Nissan Fairlady 370Z Steel Braided Brake Lines

We always explained to our customers, besides the brake rotors, calipers and tyre thread, one of the important aspect which is always being missed out, when upgrading the automotive brake system, is the brake hose! One will not obtain full braking performance if one of the above is not optimized.

The Nissan 370Z (Z34) accelerates fast and definitely needs to stop in time too! The USA engineered SUPERCIRCUIT steel braided brake hose is designed to match with its performance.



Remove the front wheels to access to the front braking system of the Nissan 370Z which consists of a set of 4-port calipers, ventilated solid rotors and rubber brake hoses as standard equipment (SEE BELOW PICTURES).



The below picture shows the front right hand side is being replaced with the SUPERCIRCUIT steel braided brake hose. The SUPERCIRCUIT steel braided brake hoses are more resistant to brake fading especially under hard braking conditions and when the brake fluid is boiling e.g. high speed continuous braking, downhills etc. Thanks to the Teflon inner hose which is able to withstand high temperature and the steel braided layer preventing the hoses from swelling under high pressure braking.


To obtain full braking performance for upgrading the brake lines, the rear rubber brake hoses (SEE BELOW PICTURES) are not to be missed out. 



Shown in the picture below, the SUPERCIRCUIT Steel Braided Brake Hose is installed to the rear right side of the Nissan 370Z. Note the special shaped brake hose fittings, which is engineered in the USA, for 100% OEM compatible and in this case, it is specially made for the Nissan Fairlady 370Z.


The length of the brake hoses and the angle of the fittings are carefully calculated and simulation of the movements on both front and rear suspension and steering is taken into account during the development of this brake hose kit to ensure maximum safety.

The USA engineered SuperCircuit steel Braided Brake Lines are compliant to Society of Automotive Engineers, International (SAE J1401) and DOT Standard Federal Motor Vehicle Safety Standard (FMVSS106) and every hose is tested to 3000 p.s.i. (normal brake master pump will reach around 1800 p.s.i.). Best of all, it comes with Lifetime Warranty*. 

To order or for more information about the above SUPERCIRCUIT Steel Braided Brake Line Kit specially developed for the Nissan 370Z (Z34), please contact SuperCircuit Exhaust Pro Shop, SS13 Subang Jaya Industrial Estate. Tel: 03 5632 2855 or join our Facebook Page for more updates and information on the brake lines.

* T&C applies.

Saturday, August 19, 2017

Perodua Alza Steel Braided Brake Lines

No matter what type of car you are driving, be it a high performance sports car or the big people carrier, safety and be able to stop in time is always the priority.

Besides the brake rotors, calipers, tyre thread and one of the important aspects which is always being missed out, when upgrading the automotive brake system, is the brake hose. One will not obtain full braking performance if one of the above is not optimized.

Here is the Perodua Alza with the SUPERCIRCUIT Steel Braided Brake Hoses installed:



To access to the front brake hose of the Perodua Alza, remove the front wheel first.


This is the factory stock rubber brake hose of the Perodua Alza front braking system. The rubber brake hose tends to expand when the brake fluid is heated up under hard driving conditions e.g. downhills, track racing etc. When rubber brake hoses expand, that means more brake fluid is needed to reach the brake calipers and one need to press harder than usual. This phenomenon is often called 'brake fading'.


The SUPERCIRUCIT Steel Braided Brake Hose comprises of 3 layers of high-tech materials. Firstly, the Teflon core, then the Teflon core is surrounded with stainless steel braided layer which ensures it does not expand or swelling under such condition, so the braking performance is maintained even under very high operation temperature and extremely high braking pressure! The outer PVC coating shields it from elements so it can last for a long time.


There are 4 pieces of rubber brake hose in total, two at the front and two at the rear, for the Perodua Alza. For optimum performance, not to miss out the rear rubber brake hoses and all will be replaced with the SUPERCIRCUIT steel braided brake hoses.


This is the factory stock rubber brake hose of the Perodua Alza rear right hand side which will be replaced with the SUPERCIRCUIT Steel Braided Brake hose.


The USA engineered SuperCircuit steel Braided Brake Lines are compliant to Society of Automotive Engineers, International (SAE J1401) and DOT Standard Federal Motor Vehicle Safety Standard (FMVSS106) and every hose is tested to 3000 p.s.i. (normal brake master pump will reach around 1800 p.s.i.). Best of all, it comes with Lifetime Warranty*. 


To order or for more information about the above SUPERCIRCUIT Steel Braided Brake Line Kit for the Perodua Alza, please contact SuperCircuit Exhaust Pro Shop, SS13 Subang Jaya Industrial Estate. Tel: 03 5632 2855 or join our Facebook Page for more updates and information on the brake lines.

* T&C applies.

Saturday, July 8, 2017

Toyota Alphard (AGH30) Steel Braided Brake Lines

To improve braking performance of such a big luxury MPV, one of the options is to upgrade the brake hoses to a steel braided ones from SUPERCIRCUIT for better and more responsive braking performance and safer too!

Steel braided Brake Hoses provide firm braking, responsive and minimizes brake fading under heavy braking conditions; significantly improves safety on the big and heavy MPVs just like the 3rd generation Toyota Alphard 3.5 (ANH30/GGH30/ANH35/GGH35, 2015~) featured here:




Remove the front wheels of the Toyota Alphard ANH30 to get access to the brake system. 


The factory original front rubber brake hose of the Toyota Alphard ANH30 shown in the picture below"


Occasionally, moisture will be absorbed into the brake fluid systems through rubber brake hoses and contaminates the brake fluid. Contaminated brake fluid can be harmful to the rubber brake hoses' inner surface and affect the braking performance.

So, please check your rubber brake hoses frequently or to change it to the very long lasting SUPERCIRCUIT steel braided brake line kit as shown in the picture below.


The whole braking system of the Toyota Alphard ANH30 consists of 4 pieces of rubber brake hoses in total, for all the front and rear wheels. In order to optimized the braking performance, the rear rubber brake hoses will be replaced.


Below is the rear rubber brake hose of the rear right hand side of the Toyota Alphard ANH30.


And the picture below shows the SUPERCIRCUIT Steel Braided Brake Hose which replaces the rubber one for optimum braking performance. The SUPERCIRUCIT Steel Braided Brake Hose comprises of 3 layers of high-tech materials. Firstly, the Teflon core and surrounded with stainless steel braided layer ensure it does not expand or swelling under such condition, so the braking performance is maintained even under very high operation temperature and extremely high braking pressure! The outer PVC coating shields it from elements so it can last for a long time.



To order or for more information about the above SUPERCIRCUIT steel braided brake line kit for the 3rd generation Toyota Alphard/ Vellfire (AGH30/GGH30/AGH35/GGH35), please contact SuperCircuit Exhaust Pro Shop, SS13 Subang Jaya Industrial Estate. Tel: 03 5632 2855 or join our Facebook Page for more updates and information on the brake lines.

* T&C Applies.

Wednesday, June 28, 2017

Toyota 86 Steel Braided Brake Lines

Better braking and be able to stop in time is an important safety issue. There are many ways to improving the braking performance from brake pads, brake discs to better tires and of course steel braided brake hoses play important role in bringing the car to stop!

Here is yet another Toyota 86 installed the SUPERCIRCUIT Steel Braided Brake Lines to further improving the braking performance.



Firstly, remove the front wheels to get access to the brake lines.


The below picture shows the factory stock rubber brake hose of the Toyota 86 front braking system. Occasionally, moisture will be absorbed into the brake fluid systems through rubber brake hoses and contaminates the brake fluid. Contaminated brake fluid can be harmful to the rubber brake hoses' inner surface and affect the braking performance.


We replaced the Toyota 86 front rubber brake hose with the SUPERCIRCUIT steel braided brake hose (SEE BELOW PICTURE). The steel braided brake hose is made according to the original size and fitting, just a lot better in braking performance thanks to the Teflon inner hose which is able to withstand high temperature and the steel braided layer preventing the hoses from swelling under high pressure braking.


For optimum braking performance, do not miss out the rear brake hoses. The rear brake hoses can be access easily after removing the rear wheels (SEE BELOW).


We replaced all the original rubber brake hoses of the Toyota 86 (SEE BELOW) to the steel braided brake hoses. All SUPERCIRCUIT Steel Braided Brake Hose Fittings are 100% compatible with the factory stock braking and ABS system of the Toyota 86. The brackets and fittings are carefully selected and engineered in the USA for maximum safety and performance.




SuperCircuit steel Braided Brake Lines are compliant to Society of Automotive Engineers, International (SAE J1401) and DOT Standard Federal Motor Vehicle Safety Standard (FMVSS106) and every hose is tested to 3000 p.s.i. (normal brake master pump will reach around 1800 p.s.i.). Best of all, it comes with Lifetime Warranty*. 

To purchase or for more information about the above Toyota 86/ GT86/ FT86 steel braided brake hoses kit, please contact SuperCircuit Exhaust Pro Shop, SS13 Subang Jaya Industrial Estate. Tel: 03 5632 2855 or visit our SuperCircuit Steel Braided Brake Lines Facebook Page for more updates and information on the brake lines.

* T&C Applies.