BUTTON BAR

____________________________________________________________________________________________________________________

| HOME | TECH | BRAKE HOSE CUSTOMIZATION |

____________________________________________________________________________________________________________________




Saturday, January 26, 2013

Steel Braided Brake Line Kit for Proton Preve

Check out the brake performance improvement on our Steel Braided Brake Line Kit VS. Stock Rubber Brake Hose tryout below:


For more information about the SuperCircuit Steel Braided Brake Line Kit, please contact us at SuperCircuit Exhaust Pro Shop, Sunway Technology Park. Tel: 03 5632 2855 or join our Facebook Page for more updates and news.

Saturday, January 19, 2013

Nissan Latio/ Tiida Steel Braided Brake Line

We have supplied and installed SuperCircuit Steel Braided Brake Line Kit for Nissan Latio/Tiida. Below are the photos before and after the installation.

SuperCircuit Steel Braided Brake Lines are compliant to Society of Automotive Engineers, International (SAE J1401) and DOT Standard Federal Motor Vehicle Safety Standard (FMVSS106) and every hose is tested to 3000 p.s.i. (normal brake master pump will reach around 1800 p.s.i.). Best of all, it comes with lifetime warranty*.



Nissan Latio front wheel is removed to access to the stock factory rubber brake hose. 

Nissan Latio front rubber brake hose shown above. Stock rubber brake hose will have an average life of five to six years. Brake hoses deteriorate faster if under high operating temperatures e.g. down hills, heavy braking etc. Moisture will also be absorbed into the brake fluid systems through rubber brake hoses and contaminate brake fluid, contaminated brake fluid can be harmful to the rubber brake hoses' inner surface....

SuperCircuit Steel Braided Brake Line installed to the Nissan front braking system.

 Nissan Latio rear wheel is removed to access to the stock factory rubber brake hose. 

Nissan Latio factory stock rubber brake hose setup at the rear. 

The SuperCircuit steel braided brake line kit installed is 100% compatible with the Nissan Latio OEM braking system. The steel braided brake lines and fittings are all USA engineered to meet FMVSS106 and SAE J1401 requirement and 100% tested to 3000 p.s.i. before delivery.

For more information, please contact SuperCircuit Exhaust Pro Shop, Sunway Technology Park. Tel: +6 03 5632 2855 or join our Facebook page for more updates.

* T&C applies.

Tuesday, January 15, 2013

VW Scirocco 1.4 TSI Steel Braided Brake Line Kit

We have installed the SuperCircuit Steel Braided Brake Line Kit to the VW Scirocco 1.4 TSI.

SuperCircuit Steel Braided Brake Lines are compliant to Society of Automotive Engineers, International (SAE J1401) and DOT Standard Federal Motor Vehicle Safety Standard (FMVSS106) and every hose is tested to 3000 p.s.i. (normal brake master pump will reach around 1800 p.s.i.). Best of all, it comes with lifetime warranty*.


The front wheel of the VW Scirocco 1.4 TSI is removed to access to the brake hose. 

Factory stock rubber brake hose of the VW Scirocco 1.4 TSI.

Stock rubber brake hose will have an average life of five to six years. Brake hoses deteriorate faster if under high operating temperatures e.g. down hills, heavy braking etc. Moisture will also be absorbed into the brake fluid systems through rubber brake hoses and contaminate brake fluid, contaminated brake fluid can be harmful to the rubber brake hoses' inner surface....


SuperCircuit Steel Braided Brake Hose installed to the VW Scirocco 1.4 TSI.

SuperCircuit steel braided brake line kit is 100% OEM compatible with professionally developed brackets for perfect fit VW Scirocco 1.4 TSI. The steel braided brake lines and fittings are all USA FMVSS106 and SAE J1401 compliant and 100% tested to 3000 p.s.i. before delivery.

 Now, it is the rear brake hose....

Factory fitted rubber brake hose at the rear of the VW Scirocco 1.4 TSI.  

Replaced it with the SuperCircuit steel braided brake line for significantly improved braking performance over the rubber brake hose.


For more information, please contact SuperCircuit Exhaust Pro Shop, Sunway Technology Park. Tel: 03 5632 2855 or join our Facebook page for more updated brake hose information. Thank you.




* T&C applies.

Monday, January 14, 2013

Kia Optima K5 Steel Braided Brake Line Kit

SuperCircuit has developed the steel braided brake hoses kit for Kia Optima K5.


The front tyre is removed for installing the Kia Optima K5 brake hose. 

Stock rubber brake hose will have an average life of five to six years. Brake hoses deteriorate faster if under high temperatures e.g. down hills, heavy braking etc. Moisture will also be absorbed into the brake fluid systems through rubber brake hoses and contaminate brake fluid, contaminated brake fluid can be harmful to the rubber brake hoses' inner surface....

Kia Optima K5 front brake hose replaced with SuperCircuit steel braided one. The 'Lifetime Warranty'* SuperCircuit Steel Braided Brake Hose with Teflon inner hose, wrapped by stainless steel braided middle section and then coated with PVC, minimized the weakness of the rubber brake hose. It also response faster and more consistent under heavy braking or panic braking conditions.

SuperCircuit steel braided brake line kit is designed to be 100% OEM compatible. Even the bracket holding the brake line will be replaced with the SuperCircuit one, no need to fasten with cable tie like some of the aftermarket ones. 

Kia Optima K5 rear wheel is removed.

Kia Optima K5 stock rubber brake hose.

The SuperCircuit steel braided brake line kit for Kia Optima K5 is made with TEFLON inner core, steel braided middle layer and then poly-coated outer layer for maximum durability and safety under harsh conditions. 

For every piece of SuperCircuit steel braided brake hose is tested at 3000psi to ensure flawless product (most car booster-assisted braking system or master pump can reach pressures of approximately 1500psi).

For more information, please contact SuperCircuit Exhaust Pro Shop, Sunway Technology Park. Tel: 03 5632 2855 or join our Facebook Page for more updates and information on the brake lines.

* T&C applies.


Citroen DS4 Steel Braided Brake Line Kit

We have installed the SuperCircuit Steel Braided Brake Line Kit to the 200+hp Citroen DS4 THP200.





SuperCircuit Steel Braided Brake Lines are compliant to Society of Automotive Engineers, International (SAE J1401) and DOT Standard Federal Motor Vehicle Safety Standard (FMVSS106) and every hose is tested to 3000 p.s.i. (normal brake master pump will reach around 1800 p.s.i.). Best of all, it comes with lifetime warranty*.

Stock rubber brake hose will have an average life of five to six years. Brake hoses deteriorate faster if under high operating temperatures e.g. down hills, heavy braking etc. Moisture will also be absorbed into the brake fluid systems through rubber brake hoses and contaminate brake fluid, contaminated brake fluid can be harmful to the rubber brake hoses' inner surface....

 SuperCircuit Steel Braieded Brake Hose installed to the rear of the Citroen DS4.

SuperCircuit Steel Braided Brake Hose with Teflon inner hose, wrapped by stainless steel braided middle section and then coated with PVC, minimized the weakness of the rubber brake hose. It also response faster and more consistent under heavy braking or panic braking conditions.

For more information, please contact SuperCircuit Exhaust Pro Shop, Sunway Technology Park. Tel: 03 5632 2855 or join our Facebook page for more news and information about steel braided brake lines.

* T&C applies.