BUTTON BAR

____________________________________________________________________________________________________________________

| HOME | TECH | BRAKE HOSE CUSTOMIZATION |

____________________________________________________________________________________________________________________




Saturday, December 21, 2013

Honda Civic EG Steel Braided Brake Line Kit

To further improve the braking performance of your Honda Civic EG, upgrade the Honda Civic EG brake hose to steel braided one!

SuperCircuit Steel Braided Brake Line Kit for Honda Civic EG is now available from SuperCircuit Exhaust Pro Shop or its authorized dealers.

<HONDA CIVIC EG FRONT BRAKE HOSES>

Steel braided brake hoses are more resistant to brake fading, it will also eliminate brake pedal sponginess, provide firm and immediate brake response hence reduce braking distance during emergency braking is especially important for such a high performance model.

Stock front brake hoses of the Honda Civic EG are made of rubber. Most of the time, moisture will be absorbed into the brake fluid systems through rubber brake hoses and contaminate brake fluid, contaminated brake fluid can be harmful to the rubber brake hoses' inner surface, and affect the braking performance. It is advisable to check your rubber brake hoses frequently for possible faulty.




Honda Civic EG factory rubber brake hose shown below. Please note that this Honda Civic EG is fiited with aftermarket shock absorber which doesn't come with the brake hose bracket holder, so it uses cable tie to hold the rubber brake hose in place which is not commendable and has the risk of brake failure if the cable ties break off.

Honda Civic EG steel brake hose installed. The SuperCircuit steel braided brake line kit is 100% compatible with the OEM suspension system and comes with the mounting brackets. So please select and install compatible aftermarket shock absorbers/ coil overs which has the compatible brake hose brackets next time you change your shocks.


<HONDA CIVIC EG REAR BRAKE HOSES>

Equally important at rear. Replaces the factory stock rubber brake hoses with SuperCircuit steel braided brake ones to eliminate brake pedal sponginess, firmer and more immediate brake response.




SuperCircuit steel Braided Brake Lines are compliant to Society of Automotive Engineers, International (SAE J1401) and DOT Standard Federal Motor Vehicle Safety Standard (FMVSS106) and every hose is tested to 3000 p.s.i. (normal brake master pump will reach around 1800 p.s.i.). Best of all, it comes with lifetime warranty*. 

For more information, please contact SuperCircuit Exhaust Pro Shop, Sunway Technology Park. Tel: 03 5632 2855 or join our Facebook Page for more updates and information on the brake lines.

* T&C Applies.

Honda Civic EK Steel Braided Brake Line Kit

To further improve the braking performance of your sporty Honda Civic EK 3-door hot hatch, use steel braided brake hoses.

SuperCircuit Steel Braided Brake Line Kit for Honda Civic EK (3-door) is now available from SuperCircuit Exhaust Pro Shop or its authorized dealers.


<HONDA CIVIC EK FRONT BRAKE HOSES>

Steel braided brake hoses are more resistant to brake fading, it will also eliminate brake pedal sponginess, provide firm and immediate brake response hence reduce braking distance during emergency braking is especially important for such a high performance model.

Stock front brake hoses of the Honda Civic EK are made of rubber. Most of the time, moisture will be absorbed into the brake fluid systems through rubber brake hoses and contaminate brake fluid, contaminated brake fluid can be harmful to the rubber brake hoses' inner surface, and affect the braking performance. It is advisable to check your rubber brake hoses frequently for possible faulty.

SuperCircuit Steel Braided Brake Line Kit is 100% compatible with the factory stock braking system and shock suspension system. So everything is installed and tighten to the original location to avoid mishandling and minimize the risk of brake failure e.g. the bracket is included in the middle of the SuperCircuit steel braided brake hose, so you can fasten it to the brake hose holder like original.

The SuperCircuit Steel Braided Brake Hose for Honda Civic EK front braking system is tighten and secured to the factory original brake hose braket, no rubbing against any moving component here. Safe and sound!


<HONDA CIVIC EK REAR BRAKE HOSES>

Equally important at rear. Replaces the factory stock rubber brake hoses with SuperCircuit steel braided brake ones to eliminate brake pedal sponginess, firmer and more immediate brake response.

Honda Civic EK rear rubber brake hose shown below.

Honda Civic EK rear steel brake hose installed.

SuperCircuit steel Braided Brake Lines are compliant to Society of Automotive Engineers, International (SAE J1401) and DOT Standard Federal Motor Vehicle Safety Standard (FMVSS106) and every hose is tested to 3000 p.s.i. (normal brake master pump will reach around 1800 p.s.i.). Best of all, it comes with lifetime warranty*. 

For more information, please contact SuperCircuit Exhaust Pro Shop, Sunway Technology Park. Tel: 03 5632 2855 or join our Facebook Page for more updates and information on the brake lines.

* T&C Applies.

Wednesday, December 18, 2013

Honda Civic Type-R Steel Braided Brake Line Kit

The Honda Civic FD2 Type-R comes with Brembo 4-pot calipers in the front as standard, to further improve the braking performance of the Honda Civic Type-R (FD2R), one of the options is to go for SuperCircuit Steel Braided Brake Lines!



<HONDA CIVIC TYPE-R FRONT BRAKE HOSES>

Steel braided brake hoses are more resistant to brake fading, it will also eliminate brake pedal sponginess, provide firm and immediate brake response hence reduce braking distance during emergency braking is especially important for such a high performance model.


Stock front brake hoses of the Honda Civic Type-R are made of rubber. Most of the time, moisture will be absorbed into the brake fluid systems through rubber brake hoses and contaminate brake fluid, contaminated brake fluid can be harmful to the rubber brake hoses' inner surface, and affect the braking performance. It is advisable to check your rubber brake hoses frequently for possible faulty.


Factory stock rubber brake hose of the Honda Civic FD2R shown below:

SuperCircuit Steel Braided Brake Hose installed to the front of the Honda Civic Type R. All fittings are 100% compatible with the factory stock braking system for maximum safety and reliability:

<HONDA CIVIC TYPE-R REAR BRAKE HOSES>


Equally important at rear. Replaces the factory stock rubber brake hoses with SuperCircuit steel braided brake ones to eliminate brake pedal sponginess, firmer and more immediate brake response.




SuperCircuit steel Braided Brake Lines are compliant to Society of Automotive Engineers, International (SAE J1401) and DOT Standard Federal Motor Vehicle Safety Standard (FMVSS106) and every hose is tested to 3000 p.s.i. (normal brake master pump will reach around 1800 p.s.i.). Best of all, it comes with lifetime warranty*. 


For more information, please contact SuperCircuit Exhaust Pro Shop, Sunway Technology Park. Tel: 03 5632 2855 or join our Facebook Page for more updates and information on the brake lines.

* T&C Applies.

Saturday, November 30, 2013

Ford Ranger 3.2D (T6) SuperCircuit Steel Braided Brake Line Kit

SUPERCIRCUIT Steel Braided Brake Line Kit for Ford Ranger 3.2D (T6) is now available through SuperCircuit Exhaust Pro Shop or its authorized dealers nationwide.




<FORD RANGER FRONT BRAKE HOSES>

Stock front brake hoses of the Ford Ranger are made of rubber. Most of the time, moisture will be absorbed into the brake fluid systems through rubber brake hoses and contaminate brake fluid, contaminated brake fluid can be harmful to the rubber brake hoses' inner surface, and affect the braking performance. It is advisable to check your rubber brake hoses frequently for possible faulty.


The factory stock front rubber brake hose of the Ford Ranger show below. 


Ford Ranger factory stock front rubber brake hoses are changed to steel braided ones from SUPERCIRCUIT. The steel braided brake hose gives more feedback and more responsive against the factory fitted rubber brake hose due to the superior performance of the inner Teflon core and steel braided outer layer preventing the brake hose from expanding under severe conditions i.e. high temperature operation, heavy braking, down hills etc.




<FORD RANGER REAR BRAKE HOSES>


Replaced with SuperCircuit steel braided brake hoses to eliminate brake pedal sponginess, provide firm and immediate brake response hence reduce braking distance during emergency braking is especially important for such a heavy and big size truck.





SuperCircuit steel Braided Brake Lines are compliant to Society of Automotive Engineers, International (SAE J1401) and DOT Standard Federal Motor Vehicle Safety Standard (FMVSS106) and every hose is tested to 3000 p.s.i. (normal brake master pump will reach around 1800 p.s.i.). Best of all, it comes with lifetime warranty*. 


For more information, please contact SuperCircuit Exhaust Pro Shop, Sunway Technology Park. Tel: 03 5632 2855 or join our Facebook Page for more updates and information on the brake lines.

* T&C Applies.

Thursday, November 14, 2013

Volkswagen Passat B6 Steel Braided Brake Line Kit

The SuperCircuit Steel Braided Brake Line Kit for Volkswagen Passat (B6, model year 2005-2010) is now available from SuperCircuit or its authorized dealers.


It is an important part of the whole braking system which contributes significant braking performance. Even after you have upgraded to a better rotors, be it slotted or cross drilled, or even you have a set of high performance brake pads, without a set of good steel braided brake lines, you don't get the full out of your braking system!

The original factory VW Passat stock brake hose is made of rubber. Moisture will be absorbed into the brake fluid systems through rubber brake hoses and contaminate brake fluid, contaminated brake fluid can be harmful to the rubber brake hoses' inner surface, and affect the braking performance. It is advisable to check your rubber brake hoses frequently for possible faulty.

Secondly, rubber hose tends to expand under high temperature, hence reducing the braking response and delaying the brake fluid pressure to arrive at the brake calipers.

<REPLACING FRONT BRAKE HOSES>
The SuperCircuit steel braided brake hose is made with TEFLON core which is able to withstand high temperature, covered with stainless steel braided middle layer to eliminate the expansion, lastly the outer layer is covered with PVC material to protect the brake hose from substances.



<REPLACING FRONT BRAKE HOSES>
Replacing the factory stock rubber brake hoses with SuperCircuit steel braided brake hoses to eliminate brake pedal sponginess, provide firm and immediate brake response hence reduce braking distance during emergency braking.




SuperCircuit steel Braided Brake Lines are compliant to Society of Automotive Engineers, International (SAE J1401) and DOT Standard Federal Motor Vehicle Safety Standard (FMVSS106) and every hose is tested to 3000 p.s.i. (normal brake master pump will reach around 1800 p.s.i.). Best of all, it comes with lifetime warranty*. 

For more information, please contact SuperCircuit Exhaust Pro Shop, Sunway Technology Park. Tel: 03 5632 2855 or join our Facebook Page for more updates and information on the brake lines.

Saturday, October 19, 2013

Honda Stream (RN6) Steel Braided Brake Line Kit

The SuperCircuit Steel Braided Brake Line Kit for Honda Stream (RN6, model year 2006-present) is now available from SuperCircuit or its authorized dealers.


It is an important part of the whole braking system which contributes significant braking performance. Even after you have upgraded to a better rotors, be it slotted or cross drilled, or even you have a set of high performance brake pads, without a set of good steel braided brake lines, you don't get the full out of your braking system!



<FRONT BRAKE HOSE>


The original factory stock brake hose of the Honda Stream is made of rubber. Moisture will be absorbed into the brake fluid systems through rubber brake hoses and contaminate brake fluid, contaminated brake fluid can be harmful to the rubber brake hoses' inner surface, and affect the braking performance. It is advisable to check your rubber brake hoses frequently for possible faulty.

Secondly, rubber hose tends to expand under high temperature, hence reducing the braking response and delaying the brake fluid pressure to arrive at the brake calipers.



The SuperCircuit Steel braided brake hose installed to the front of the Honda Stream below. The steel braided brake hose is made with TEFLON core which is able to withstand high temperature, covered with stainless steel braided middle layer to eliminate the expansion, lastly the outer layer is covered with PVC material to protect the brake hose from substances.

<REAR BRAKE HOSE>

The rear brake hoses of the vehicle are equally important. Below is the Honda Stream rear brake system before and after installing the SuperCircuit steel braided brake hose.




Replacing the factory stock rubber brake hoses with SuperCircuit steel braided brake hoses to eliminate brake pedal sponginess, provide firm and immediate brake response hence reduce braking distance during emergency braking.

SuperCircuit steel Braided Brake Lines are compliant to Society of Automotive Engineers, International (SAE J1401) and DOT Standard Federal Motor Vehicle Safety Standard (FMVSS106) and every hose is tested to 3000 p.s.i. (normal brake master pump will reach around 1800 p.s.i.). Best of all, it comes with lifetime warranty*. 

For more information, please contact SuperCircuit Exhaust Pro Shop, Sunway Technology Park. Tel: 03 5632 2855 or join our Facebook Page for more updates and information on the brake lines.

Friday, October 18, 2013

Mazda MX-5 (NC) Steel Braided Brake Line Kit

SuperCircuit Steel Braided Brake Line Kit for Mazda MX-5 (NC) is available through SuperCircuit or its authorized dealers nationwide.



INSTALLING SUPERCIRCUIT STEEL BRAIDED BRAKE LINES TO THE FRONT WHEELS OF MAZDA MX-5


Stock front brake hoses of the MX-5 are made of rubber. Moisture will be absorbed into the brake fluid systems through rubber brake hoses and contaminate brake fluid, contaminated brake fluid can be harmful to the rubber brake hoses' inner surface, and affect the braking performance. It is advisable to check your rubber brake hoses frequently for possible faulty.





Mazda MX-5 front stock rubber brake hoses are changed to steel braided ones from SuperCircuit. The steel braided brake hose gives more feedback and more responsive against the factory fitted rubber brake hose due to the superior performance of the inner Teflon core and steel braided outer layer preventing the brake hose from expanding under severe conditions i.e. high temperature operation, heavy braking, down hills etc.




INSTALLING SUPERCIRCUIT STEEL BRAIDED BRAKE LINES TO THE REAR WHEELS OF MAZDA MX-5


It is an important part of the whole braking system which contributes significant braking performance. Even after you have upgraded to a better rotors, be it slotted or cross drilled, or even you have a set of high performance brake pads, without a set of good steel braided brake lines, you don't get the full out of your braking system!







Replaced with SuperCircuit steel braided brake hoses to eliminate brake pedal sponginess, provide firm and immediate brake response hence reduce braking distance during emergency braking.

SuperCircuit steel Braided Brake Lines are compliant to Society of Automotive Engineers, International (SAE J1401) and DOT Standard Federal Motor Vehicle Safety Standard (FMVSS106) and every hose is tested to 3000 p.s.i. (normal brake master pump will reach around 1800 p.s.i.). Best of all, it comes with lifetime warranty*. 

For more information, please contact SuperCircuit Exhaust Pro Shop, Sunway Technology Park. Tel: 03 5632 2855 or join our Facebook Page for more updates and information on the brake lines.

Thursday, October 17, 2013

Toyota Land Cruiser/Cygnus 100 series Steel Braided Brake Line Kit

The lifetime warrantied* SuperCircuit Steel Braided Brake Lines for Toyota Land Cruiser (100-series) or Toyota Cygnus (model year 1998 -2007) is now available.

Steel braided brake lines will help to eliminate brake pedal sponginess, provide firm and immediate brake response hence reduce braking distance during emergency braking.

It is an important part of the whole braking system which contributes significant braking performance. Even after you have upgraded to a better rotors, be it slotted or cross drilled, or even you have a set of high performance brake pads, without a set of good steel braided brake lines, you don't get the full out of your braking system!



<FRONT>

Steel Braided Brake Line for the Toyota Land Cruiser front. 


<REAR>

Steel Braided Brake Line for the Toyota Land Cruiser rear. 


There is an extra piece of steel braided brake hose in the rear middle which is always missed out by a lot of people. We also included that in the kit, so you have a full steel braided brake hose set for the Land Cruiser 100 series.



Steel braided brake hose gives more feedback and more responsive against the factory fitted rubber brake hose due to the superior performance of the inner Teflon core and steel braided outer layer preventing the brake hose from expanding under severe conditions i.e. high temperature operation, heavy braking, down hills etc.

For more information, please contact SuperCircuit Exhaust Pro Shop, Sunway Technology Park. Tel: 03 5632 2855 or join our Facebook Page for more updates and information on the brake lines.




* T&C applies.